One question per day; those who answer correctly receive 10 wealth points, while participants receive 2 wealth points； Question 249
Thread Content
Fill-in-the-blank: In industrial control, the PID control method is commonly used; P, I, and D refer to ( ), ( ), and derivative control respectively. In the loop adjustment interface, O, P, and S refer to ( ), ( ), and ( ) respectively. Answer: Ratio, integral, control value, measured value, set value
In industrial control, the commonly used PID regulation involves P, I, and D, which refer to ( ), ( ), and differential action respectively. In the loop adjustment interface, O, P, and S refer to ( ), ( ), and ( ) respectively. Answer: Ratio, integral, control value, measured value, set value
1/P, I, D refer to the proportional coefficient, integration, and differentiation respectively.
PID refers to P (proportional), I (integral), and D (derivative); OPS: O (image), O (adjustment), S (variation)
Proportional, integral, manual, automatic, cascade
In industrial control, the PID control method is commonly used; P, I, and D refer to (proportional), (integral), and differential control respectively. In the loop adjustment interface, O, P, and S refer to (output), (operation), and (setting) respectively.
In industrial control, the PID regulation is commonly used, where P, I, and D refer to (proportional), (integral), and differential control respectively. In the loop adjustment interface, O, P, and S refer to (output), (measurement), and (setpoint) respectively.
P represents proportional operation, and I represents integral operation. O denotes operation, P denotes measurement, S denotes setting
In industrial control, the PID control method is commonly used; P, I, and D refer to (proportional), (integral), and differential control respectively. In the loop adjustment interface, O, P, and S refer to (output), (operation), and (system) respectively.
The PID control commonly used in industrial control refers to Proportional, Integral, and Derivative, respectively