How to effectively implement the owner responsibility system at the production site

Article 3: Based on the responsibility areas assigned to each team according to the workshop structure, the team members are responsible for identifying and addressing potential hazards within their respective areas. They are accountable for such hazards; if any hazards are detected, they must immediately request that they be removed. If removal is not possible, they must report the situation to the workshop’s safety management personnel without delay； If cross-checks reveal that significant hazards within a team have not been addressed, the team will be held accountable. Article 4: During the shutdown for inspection and maintenance, the personnel on duty form the owners of the facility and are responsible for any abnormalities related to fire prevention and theft prevention of the facility ； When most of the staff on the day shift are on duty, the principle of proximity is applied: those who are in the vicinity and detect abnormalities such as fires or thefts should take immediate action or report to the shift leader; otherwise, the crew members on duty or those who are nearby will be held accountable ； During operation, the shift team on duty is the owner of the facility and is responsible for any abnormalities related to fire prevention and theft prevention. Article 5: Every catalyst-related employee is the owner of the catalyst installation, and all personnel carrying out work or activities within the area of the catalyst installation must comply with the safety management regulations and rules for that area ； Owners within 10 meters of the work area have the right to supervise compliance with the safety management regulations for all personnel carrying out work and activities in the surrounding area. If these regulations are not followed, they must promptly advise such individuals to stop their actions. In cases where people refuse to listen, it is necessary to report the situation to the workshop’s safety officers immediately; otherwise, the workers operating in that area shall bear joint liability, and they will be held accountable at one-third the rate specified for supervisors. Article 6: In the area where catalytic devices are located, if an accident resulting in injury occurs to external personnel while they are carrying out work or activities there, the supervisor or the officers and employees within a radius of 10 meters bear joint management responsibility; in the absence of the supervisor on site, assessment will be conducted accordingly. Article 7: The safety officer for the catalytic unit area is responsible for ensuring the implementation of all safety-related rules and regulations in that area, as well as for overseeing their compliance. Proactively identify security management gaps in the region and make timely adjustments to improve them. And humbly accept various management suggestions put forward by other personnel.

It seems to be just a part of it. Could you share your information? Big bonus points! !

Owner Responsibility System Article 1: In a work team, the team leader serves as the team’s safety officer, and is responsible for the safety of the team members； The master is the apprentice’s safety officer and is responsible for the apprentice’s safety. Article 2: The shift supervisor is the safety officer who operates in the control room and is responsible for ensuring safety during operations in that room ； The on-site operator is the safety officer responsible for the safety of operations at the work site. Article 3: Based on the responsibility areas assigned to each team according to the workshop structure, the team members are responsible for identifying and addressing potential hazards within their respective areas. They are accountable for such hazards; if any hazards are detected, they must immediately request that they be removed. If removal is not possible, they must report the situation to the workshop’s safety management personnel without delay ； If cross-checks reveal that significant hazards within a team have not been addressed, the team will be held accountable. Article 4: During the shutdown for inspection and maintenance, the personnel on duty form the owners of the facility and are responsible for any abnormalities related to fire prevention and theft prevention of the facility ； When most of the staff on the day shift are on duty, the principle of proximity is applied: those who are in the vicinity and detect abnormalities such as fires or thefts should take immediate action or report to the shift leader; otherwise, the crew members on duty or those who are nearby will be held accountable ； During operation, the shift team on duty is the owner of the facility and is responsible for any abnormalities related to fire prevention and theft prevention. Article 5: Every **employee is** the owner of the facility; all personnel carrying out work or activities within the facility area must abide by the safety management rules and regulations applicable to that area ； Owners within 10 meters of the work area have the right to supervise compliance with the safety management regulations for all personnel carrying out work and activities in the surrounding area. If these regulations are not followed, they must promptly advise such individuals to stop their actions. In cases where people refuse to listen, it is necessary to report the situation to the workshop’s safety officers immediately; otherwise, the workers operating in that area shall bear joint liability, and they will be held accountable at one-third the rate specified for supervisors. Article 6: Within the **equipment area, if an accident resulting in injury occurs to external personnel while they are carrying out work or activities, the supervisor or the officers and employees within a radius of 10 meters bear joint management responsibility; in the absence of the supervisor on site, assessment will be conducted accordingly. Article 7 **The safety officer in the plant area is responsible** for ensuring the implementation of all safety-related rules and regulations in that area, as well as for overseeing their compliance. Proactively identify security management gaps in the region and make timely adjustments to improve them. And humbly accept various management suggestions put forward by other personnel.