【Daily Question】- Technical parameters of the spraying unit in an eye washer (2 points for a reply, 4 points for a correct answer)
Thread Content
Fill-in-the-blank question: According to the American standard for eye wash stations, ANSI/ISEA Z358.1 2014, the spraying mechanism of an eye wash station must meet the following technical specifications: 1. The ball valve controlling the spray must open within 1 second and remain open in that state. 2. The flow rate of the spray water must be >75.7 L/MIN, with a flushing time of >15 MIN. 3. At a height of 1524 mm above the ground, the diameter of the spray water stream must be no less than ( ) mm
1. The spray ball valve shall open within 1 second and remain open in that state. 2. Spray water flow rate: >75.7 L/MIN; flushing time: >15 MIN. 3. At a height of 1524 mm above the ground, the diameter of the spray water shall not be less than ( ) mm. Answer: 100
In accordance with the American standard for eye wash stations ANSI/ISEA Z358.1 2014, the spraying mechanism of an eye wash station must meet the following technical specifications: 1. The ball valve controlling the spray must open within 1 second and remain open in that state; 2. The flow rate of the spray water must be >75.7 L/MIN, with a flushing time of >15 MIN; 3. At a height of 1524 mm above the ground, the diameter of the spray water stream must be at least 500 mm
At a height of 1524 mm above the ground, the diameter of the spray water must not be less than (508) mm
2. Spraying water flow rate: >75.7 L/MIN; flushing time: >15 MIN
508 508 508 508
In accordance with the American standard for eye wash stations, ANSI/ISEA Z358.1 2014, the spraying mechanism of an eye wash station must meet the following technical specifications: 1. The spray ball valve must open within 1 second and remain open in that state; 2. The flow rate of the spraying water must be >75.7 L/MIN, with a flushing time of >15 MIN; 3. At a height of 1524 mm above the ground, the diameter of the spraying water stream must be at least 508 mm
In accordance with the American standard for eye wash stations, ANSI/ISEA Z358.1 2014, the spraying mechanism of an eye wash station must meet the following technical specifications: 1. The spray ball valve must open within 1 second and remain open in that state; 2. The flow rate of the spraying water must be >75.7 L/MIN, with a flushing time of >15 MIN; 3. At a height of 1524 mm above the ground, the diameter of the spraying water stream must be at least 508 mm
3. At a height of 1524 mm above the ground, the diameter of the spray water must be no less than (508) mm