Seeking advice on the performance of pre-filters in catalytic flue gas desulfurization water treatment systems (PTU) (replies will be rewarded)
Thread Content
The last edit to this post was made by hean*n2007 on 2015-7-20 at 10:00. Everyone: For the flue gas desulfurization project, we have chosen BELCO’s EDV wet desulfurization technology; for the water treatment system (PTU), BELCO recommends the use of filters. Based on our research, the performance of filters in China is not very satisfactory. We are considering adding pre-filters to the filter configuration, and we would like to ask if anyone here knows what the effectiveness of pre-filters is What is an appropriate flux setting?
Without a pre-filter, operation is not stable; EDV+PTU
I mean, there is a set of filters, which includes three fine filters that are used in turn, with each one carrying 50% of the load. Is it necessary to add a pre-filter (at 100% load) before the fine filtration?
Do you have contact information? I’ll have the technician contact you directly
QQ 183378782: Add me on QQ directly; I’ll call him
A pre-filtering system can be added at the front end, consisting of a self-cleaning filter and a precision filter.
Has your company’s equipment used pre-filters?
We specialize in filter solutions; we can have a technical discussion if that’s convenient.
Which organization do you work for? Could you tell me?