Installation location of the pressure gauge in the reaction tank
Thread Content
Dear experts: Can the pressure gauge for a reaction tank or reactor be installed on the pipeline manifold, provided that the manifold is in direct connection with the tank? ? Must it still be connected directly to the tank or vessel? Are there any relevant specifications or standards?
It should still be present on the device itself, although it’s not usually checked that often – I’m referring to the pressure gauge on site. The remotely transmitted pressure is usually displayed on the DCS at a location that facilitates maintenance; it is normal on the pipelines as well.
This post was last edited by ylb913 on 2016-10-29 at 19:59. It was originally a duplicate reply post with the same content as the one above – it was the result of replying twice. I’m replying via computer, and currently the redirection isn’t working properly; since it’s not possible to confirm success, multiple replies are being sent. This issue occurred yesterday as well @Cleaner. ——It might be when clicking to reply to the other person.
Is it feasible for the pressure gauge and the feed pipe to share a common junction box?
It is still very necessary to have it in the ontology.