What is the typical pressure applied in tower compression tests, in kilograms?
Thread Content
What pressure is generally used for leak detection by using a tower press?
During the leak testing and pressure testing of the device, the pressure must not exceed the design pressure of the equipment.
Water pressure: 1.5 times the operating pressure. Air pressure: 1.2 times the operating pressure
The tower’s tolerance pressure is 8 kilograms; does that mean 9.6 kilograms is required when inflating it?
Yes, the pressure drop needs to be recorded after suppression
Will there be problems if the pressure is too high? Why is it necessary to keep a record of blood pressure reductions?
Check the airtightness of the tower; there are no issues. Generally, the water pressure of the equipment at the time of leaving the factory is up to the design pressure
Ours is 1.15 times the operating pressure; just make sure it doesn’t exceed the design pressure!
The pressure during normal production.
The negative pressure during normal operation is 1000 pascals