Digital temperature display
Thread Content
The digital temperature display of swp-c803-02-08 shows temperature values without a decimal point; it is not possible to set this parameter, and the input signal is a pT100 thermistor. How to handle it properly? Thank you
Simply change the input type 08 in the secondary parameters to 09.
It’s because the parameters aren’t set correctly; there must be parameters related to decimal points. The market for digital displays is currently overcrowded and chaotic, and product quality is a serious issue. Prices have remained almost unchanged for two decades; to make a profit, companies have to reduce the quality of their components, and the biggest problem is the poor quality of the operation buttons.
When a Pt100 signal is input, swp-c803-02-08-HL can display values with one decimal place; the parameters need to be modified as follows: SL0=09, SL1=1, OUL=lower limit of the transmitter output, OUH=upper limit of the transmitter output, PVL=-99.9, PVH=199.9. The measurement range of the instrument is -99.9 to 199.9. I recommend this link for you to take a look: http://www.yunrun.com.cn/ServiceCentre/zhishibaoku/251.html