Summer safety inspection
Thread Content
What kind of inspections can be carried out at the group company level regarding the summer safety checks for its subsidiaries? A comprehensive safety inspection has already been conducted on one of these subsidiaries
The inspection items are targeted, such as electrical installations and measures for lightning protection and electric shock prevention. Emergency response: fire fighting, heat prevention. Employee Status ； Personal protective equipment, and so on. .
Targeted safety inspections in summer mainly focus on fire prevention, lightning protection, and flood control.
Targeted professional inspections in the summer. .
Yes. Basically, the group company inspects many of its subsidiaries; there are around 10 such subsidiaries. For example, when inspecting the measures taken to prevent heat-related issues, the scope is quite broad. Random inspections may not be sufficient to identify any problems, so it’s being considered whether other specialized inspections are needed.
1. It is possible to refer to previous inspections to verify whether the safety issues identified back then have been rectified. 2. Focus on examining the current safety status and management of key equipment and critical areas within the company. 3. **Daily safety management of chemicals, particularly the safety management of storage areas for flammable liquids and the requirements for operation points.
Well, the first one has been ongoing. You can check out the others; I’ll think about it more. Thank you, expert, for your guidance:victory:.
During the summer, it is important to take precautions against four types of hazards: lightning, floods, heat, and fires/explosions. It is necessary to identify potential risks in these four areas.