What is the purpose of placing ceramic balls on top and bottom of the catalyst in the tower?
Thread Content
What is the purpose of placing ceramic balls on top and bottom of the catalyst in the tower?
It is to prevent the catalyst from leaking or escaping.
The one above can be used as a cover, while the one below prevents leakage.
The two people upstairs are being a bit ridiculous. First of all, the container should be called a reactor. Secondly, the upper porcelain ball serves to further distribute the air entering the reactor, ensuring even air distribution and thus maximizing the catalyst’s effectiveness ； The purpose of the ceramic balls at the bottom is to reduce the amount of catalyst needed, thereby lowering the cost of the catalyst. The porcelain balls I’ve come across are generally in three or four sizes. There are specialized porcelain ball manufacturers in Ningbo, Zhejiang.
The cushion layer is used to pre-distribute the catalyst to prevent its loss, thereby playing a role in the distribution of materials.
The porcelain balls at the upper part serve to distribute the material and also prevent the catalyst from shifting around； The lower part serves as a support agent and also helps prevent the catalyst from escaping.
Is it to prevent collisions? Seeking advice
The bottom consists of a cushion layer to prevent the catalyst from leaking away； The top part functions as a pre-distributor, serving to distribute the material.
I think what was said on the 8th floor is right; there’s not much to discuss about this arrangement
The porcelain ball at the top serves to facilitate a more even distribution of the material； The ceramic ball at the bottom serves as a cushioning layer to prevent excessive loss of the catalyst.
Can the porcelain balls at the bottom help reduce the amount of catalyst required?