Dampener pressure drop
Thread Content
Effect of fiber mist eliminator layout on pressure drop: How do horizontal and vertical arrangements of the mist eliminator affect the pressure drop? Please ask some experts for some guidance! Gas velocity: 2~3 m/s.
The pressure drops are very small, only a few hundred millimeters of water column
Hundreds of millimeters of water column! This is a fan, not a compressor or pump :)
Analogous similar devices are used to collect data during operation, and adjustments are made based on the working conditions.
The last edit to this post was made by maildhu on 2016-6-20 at 14:32. In the case of fiber filters, it depends on the specific application; the layout, whether horizontal or vertical, has little impact on the pressure drop. The wind speed of 2–3 m/s you mentioned is actually quite high for fiber filters, and the pressure drop isn’t a few hundred pascals as some people say – it’s likely in the thousands of pascals, depending on the thickness of the fiber bed. I am Engineer Wang from Hiko Environmental Protection in the United States, responsible for CECO filter technology. If you have any questions, feel free to contact me at 13585961992