Do you know what considerations need to be taken into account when operating an electric single-girder crane?

Thread Content

1. During operation, the operator must conduct a thorough inspection of all the components inside the electric single-girder crane; only by ensuring the safety of the entire machine can it be operated stably. 2. When operating an electric single-girder crane, the operator must work closely in coordination with the person giving instructions below. If someone on the ground warns of a danger signal, the electric single-girder crane must be stopped immediately. Furthermore, in cases where the signals sent by the commander are unclear, the driver has the right to refrain from performing driving operations. 3. When operating an electric single-girder crane, the operator must use the handle switch; remember that limit position switches must not be used to stop the crane. 4. Unless under special circumstances, reverse operation should not be used unless absolutely necessary; moreover, the normal forward direction of the electric single-girder crane controller must not be suddenly switched to reverse direction. 5. The weight of the load to be lifted must not exceed the additional load capacity specified by the crane, and care must be taken to prevent the electric single-girder crane from lifting the load at an angle or in a skewed manner.