How to set up a hot standby for the gasifier quench water pump?

2015-09-25View Original

Thread Content

How to set up a hot standby for the gasifier quench water pump? :)

Reply #22015-09-26

For example, when one pump is in operation, the inlet and outlet valves of the other pump are closed. The bypass valve of the check valve on the outlet pipeline is opened, allowing high-pressure sealing water to be used to fill the pump. Once the pipes are filled with water and no bubbles appear during the venting process, the vent valve is closed. Then pressurize with sealed water, and once the pressure is reached, slowly open the inlet valve. Open the outlet valve to 15–20, heat pump! Seeking guidance!

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

Quick Links