The catalyst in the reforming unit is suffering severe wear – what could be the reasons?
Thread Content
Catalysts are expensive; it’s not feasible to use them in this way. Please come up with a good idea. Otherwise, you’ll suffer heavy losses.
Has the catalyst dust on the side of the classifier increased? First, we need to find out where these lost catalysts have gone in order to determine the cause
Has Johnson’s network broken down? Normally, the catalyst wouldn’t run away.
It is still necessary to determine where the catalyst is leaking from; once the cause is identified, operations should be stopped promptly for maintenance.
It’s all platinum that’s running there; stop work immediately and start the reactor for inspection
Where can one tell from the device that the catalyst has been lost? Separate hopper? The reason is probably that the catalyst isn’t strong enough and has broken into dust; moreover, is Johnson’s mesh damaged? Also, is there a problem with the reducing gas filter? Has the catalyst gotten into the recycler?