What will be displayed on a horn-shaped radar level gauge if the horn is facing upward?
Thread Content
Our plant has a limestone tank, and there is a horn-shaped radar level gauge on the top of the tank. If the flange is removed and the horn is turned upward, what will be displayed by the remote transmitter?
The err fault alarm will indicate an error
New idea, give it a try; my company doesn’t have anything like this: lol
It’s incredible – how can it be installed so that the speaker opening faces upward?
The idea is quite strange. However, if it really points upward, there will be no reflected echo. The value used to determine whether the signal is good or not is 0; if the LED shows no reading, it indicates an error. . . . .
It should be displayed as 0. In the case of radar-based level measurement, the tank height is reduced by the height of the air space above it; the higher the air space, the lower the liquid level. Thus, liquid level = tank height – height of air space, and therefore tank height = 0. It will either be 0 or show an incorrect value
No reflected waves; it has exceeded the set range
Talents – you might give it a try. Absolutely nothing can be detected