HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

The upper and lower towers are arranged in parallel

2015-11-27View Original

Thread Content

Currently, air separation units have upper and lower towers arranged in parallel. I would appreciate any guidance you can provide; thank you!
Reply #22015-11-27
You mean that it crashes to the ground because of the excessive height, right?
Reply #32015-11-27
Yes, add two liquid oxygen circulation pumps; I’d like to know about this process.
Reply #42015-11-28
In large and very large air separation units, the lower and upper columns are designed to be arranged side by side; both columns are packed columns. However, due to the extremely high total height of these two columns (usually greater than 70 meters), in order to ensure smooth flow of liquid oxygen from the lower column to the upper column, they are placed side by side, which requires the addition of two additional pumps for circulating liquid oxygen. However, by effectively reducing the exhaust pressure of the air compressor, the energy-saving effect is also significant~~
Reply #52015-11-29
That’s exactly what I do: everyone goes to the ground level. If they stay too high on the tower, the liquid from below can’t reach them. It’s also easy to install.
Reply #62015-11-29
Such installation methods are relatively rare; the 4 sets of 60,000-capacity Hangyang oxygen production units at Shenhua Baotou are an example of this. You can gather more details on it!
Reply #72015-11-29
I’ve never seen it. Could the original poster share some information or pictures?
Reply #82015-11-30
Whether the upper and lower towers are arranged parallelly depends mainly on whether liquids such as liquid air, liquid nitrogen, and contaminated liquid nitrogen from the lower tower can be delivered to equipment located at higher positions, such as the upper tower and the crude argon condenser. The main factors contributing to the overall height of air separation units include the use of packing in the lower sections of the tower, multiple stages of primary cooling, and larger-sized pipelines. Generally speaking, it is recommended to use an upper and lower arrangement whenever possible.
Reply #92015-11-30
Generally, an 80,000-level air separation unit is installed on the tower ground.

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.