Calculate the container pressurization time
Thread Content
Using air at a pressure of 0.7 MPa, and with a 150 mm pipeline, it takes how long to fill a container with a volume of 10,000 cubic meters at atmospheric pressure, so that the pressure inside the container reaches 0.05 MPa?
Are you referring to 0.15 MPa or 0.05? Atmospheric pressure is 0.1 MPa; what happens if the pressure is low after filling with gas?
I’m here to learn* a bit; I’m facing the same problem as well
Do we also need to know what the traffic volume is?
This refers to gauge pressure; your 0.1 MPa of atmospheric pressure is absolute pressure.
It is also necessary to know the gas flow rate, or to calculate it based on factors such as the length of the pipe and whether valves are used for control
Of course, there are valves for control in reality, which simplifies the calculations; the flow rate isn’t clear
{:3_65:} I guess the flow rate wasn’t provided since it’s not clear; and even if the flow rate is known, it’s just an estimate. After all, as the pressure in your tank increases, the flow rate will decrease. . . .