Post Emergency Card

Thread Content

Emergency Card for Tank Area Positions. Target users: Tank area warehouse managers, position operators. *H’S’ | {+E9MB% { Hazardous target: Solvent storage tanks. Basis for implementation: **Company’s **Emergency Response Plan for Chemical Accidents**. Accident prediction: Excessive liquid level in storage tanks； Leakage from tank truck and storage tank valves ； Pipeline rupture and leakage ； Leaks due to operational errors and health hazards: Depending on the materials stored in each tank in the tank farm, different solvents pose varying levels of risk to human health. It is essential that operators are well aware of the physical and chemical properties of these materials as well as the appropriate protective measures (as indicated on the information cards). Emergency procedures: Know the direction of wind currents – observe the wind direction flags and be aware of the evacuation routes and locations in the upwind direction. Report promptly: In the event of any abnormalities, report them immediately to the company’s supervisor. Emergency contact: 110 ； 119 ； 120 Leak confirmation: Solvent leaks have a pungent odor. Headcount check: Upon arriving at the evacuation site, members should count each other’s numbers. S General guidelines for on-site handling: Personal protection: Turn off your phone; in the event of a minor leak, wear a gas mask (use a dry towel to cover your mouth and nose in an emergency) and protective gloves. In the case of a large leak, use a positive-pressure air respirator. At least two people must be present when entering the site ； 6 N Disposal: Depending on the amount and severity of the leakage, the following disposal procedures shall be followed accordingly. General accident handling procedure: Close the discharge valve at the rear of the tank truck. (Dumping from the tank truck) Press the stop button (red) on the pump that is in operation. Close the inlet and outlet valves at the storage tank. Locate the source of the leak, close the valves upstream and downstream of the pipeline at the leak site, and open the valve of the backup pipeline. When the valve cannot be closed, use a dry cloth, cork, etc. to seal the leak, and collect it in an eco-friendly emergency bucket. Close the valves of the rainwater wells around the cofferdam, and report via walkie-talkie at the same time. Open the emergency water valve to spray mist to reduce evaporation and combustion. Contaminated waste is collected together and sent to wastewater treatment plants, while solid waste is taken to disposal centers for processing. The production load was reduced, the company shut down certain parts of its operations, and emergency responders went to the site of the leak to seal it. }7 g& t2 f Procedures for dealing with major accidents: Immediately report to the department head, who in turn reports to the company’s management. The company’s management then notifies relevant authorities such as the municipal safety supervision agency and the fire department, activates the emergency response plan, and informs the surrounding communities. Upon on-site verification, it was found that the personnel present were unable to stop the leak, and there were signs of a potential major accident. In accordance with the company’s emergency response plan, unrelated personnel should evacuate the site, while the members of the emergency response team should follow the unified instructions from their superiors regarding disaster relief efforts. Emergency phone number: