Selection of imported safety valves
Thread Content
I would appreciate it if someone could recommend an imported steam safety valve with good cost-performance: a setting pressure of 1.8 MPa, operating at a temperature of 280°C with a flow rate of 100 t/h, and DN200 size. Thank you!
This post was last edited by City Boy on 2016-5-5 19:36. Do you really have to use imported products? Domestic ones are completely fine; the prices of imported products are too high. You can contact me via the site to get information on domestic options. Well-known foreign safety valve brands include TYCO, LESER, and Dresser Consolidated
If the client insists, there’s nothing I can do :Q. Thank you.
Hamlet, Bintler, and German Ries are all acceptable
For steam safety valves, use Andrew Gruske Crosby (TYCO) and Drayse
Thank you:handshake
The displacement of yours is a bit high; you might consider choosing a pilot-operated safety valve
I manufacture safety valves for Dreisler. Contact me at QQ 191811070; I have the relevant materials
For steam safety valves, use Andrew Gruske Crosby (TYCO) and Drayse
I manufacture American FARRIS safety valves. Please provide the safety valve data sheet; I’ll send you the contact information via private message.