HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

Seeking help regarding pipeline leaks

2015-09-03View Original

Thread Content

My company has a large underground energy pipeline network, and during production, the energy distribution rate is often low, which suggests that there may be leaks in the pipelines. However, no obvious leakage points were found after checking the accessory rooms and valve chambers. I am now looking for someone who uses such devices or who has experience in recommending them for detecting leaks in pipelines, as the media involved are mainly water, air, and steam
Reply #22015-09-03
If you don’t address the root cause, how can leaks be prevented? It’s more meaningful to do that than just detecting or sealing leaks
Reply #32015-09-03
It is best to replace the entire pipeline; checking for and sealing leaks does not solve the problem at its root.
Reply #42015-09-03
Accurate measurement is important, but investments in this area are often reluctant to be made
Reply #52015-09-03
1. After checking the accessory rooms and valve chambers, no obvious leakage points were found; this at least doesn’t indicate any problem with water. If there is a leak, the water may seep downward, and it’s normal to encounter layers where water can seep through. 2. There is no inspection for air passing underground. 3. I’ve never seen steam pipes laid directly underground; at most they are placed in ducts, but there are issues related to insulation and measurement……
Reply #62015-09-03
Leaks in buried pipes are indeed a hassle, so if conditions permit, it is recommended to switch to above-ground pipes.
Reply #72015-09-03
Each using unit installs flow meters to calculate the difference between the product output and the actual usage volume.
Reply #82015-09-04
Water and steam pipes are generally installed on pipe trays, so leaks can be heard or seen if they occur; for underground water pipes, it is only possible to determine whether there is a leak by installing flow meters on the main pipes and branch pipes.
Reply #92015-09-06
Have you used any leak detectors? Could you recommend one? The main requirements are ease of use and accuracy, with water being the primary medium used
Reply #102015-09-09
Those who have used leak detection equipment, please help provide some information

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.