Reasons for the loss of tons in the gas separation unit
Thread Content
What are the reasons for weight loss in the gas separation unit, and how can such weight loss be prevented?
Check the drain systems of various equipment, the pressure relief valves of pumps, the bypass lines of the safety valves in towers and tanks, as well as to determine whether there is any internal leakage in the heat exchangers
Identify any leaks, check whether the measurements are accurate, verify that operations are functioning properly, and ensure that the device’s operational process is normal
It’s probably due to a leak; check the heat exchanger, safety valve, and vent system as well
1. Check whether the meter is accurate? First, inspect the measuring instrument; second, check whether it meets the installation requirements for such instruments. 2. Check whether the safety valve is properly closed
It is also necessary to check whether the outlet airflow demisting and defoaming separator is operating properly. If there are problems with the demisting and defoaming of the exhaust airflow, significant material loss will occur, and liquid accumulation will also appear in the downstream pipeline equipment. Be sure to check carefully.