Thread Content
The second phase of Xinjiang Shengxiong Energy’s PVC production facility, with a capacity of 500,000 tons per year, is expected to be completed by August 30. Workers are working round the clock to meet this deadline. Publication date: 2016-07-03. The second phase of Xinjiang Shengxiong Energy’s PVC production facility, with a capacity of 500,000 tons per year, is expected to be completed by August 30; workers are working day and night to meet this schedule. To ensure that the project is completed by August 30, a detailed project timeline has been established at the construction site. Weekly meetings are held with various construction units to coordinate and resolve issues and difficulties encountered during construction, ensure progress on the project, and guarantee the effective implementation of the work plan, so as to enable the successful joint commissioning of the utility systems by June 30. http://pic.kuaizhan.com/g2/M00/E9/52/wKjmqld5JrmABv8MAABYcna6Y948957576/imageView/v1/thumbnail/640x0 To ensure successful joint testing, it is crucial first to calibrate the equipment properly; secondly, power supply must be available for the joint debugging process. Due to the delayed arrival of some equipment and the backlog of previous equipment, it is extremely difficult to complete the installation and calibration of the large-scale equipment. To this end, the project team took proactive action; Dai Haiyan, the deputy chief engineer of the Chlor-alkali Phase II project team, organized the supervisors, representatives from Chengda, and heads of various departments within the project team to conduct self-inspections of the areas under their responsibility. Additionally, a meeting was held every other day to discuss the operations of the utility systems for the PVC Phase II project. At these meetings, the problems identified during the self-inspections were analyzed promptly, and corrective actions were proposed, with specific deadlines and responsible persons assigned to ensure their completion. The specialist from the electrical department of the project team discussed the power supply plan with the production staff at the thermal power plant. Under the premise of ensuring safe production, power was supplied to the utility substation and the VCM substation. At 16:00 on the afternoon of June 25, a single-unit test was conducted on the circulation water pump room; single-unit tests were also completed for high-voltage motors No. 2 and No. 3, as well as 5 fan motors, so as to ensure that the circulation water station was ready for joint tests. http://pic.kuaizhan.com/g2/M01/E7/9D/CgpQVFd5JruAQ-m2AACjJevqTtk1110752/imageView/v1/thumbnail/640x0 On June 25th, the specialist in PVC processing installed valves and blind flanges on all the circulating water pipes, based on the layout of the pipeline network at the site; clear markings were also applied to all of these valves ； The safety specialist also conducted inspections to ensure proper construction practices at the site during the pre-commissioning phase, issued commissioning permits to personnel from various departments and construction units, thereby ensuring safety and stability at the site ； The automation specialists also cooperated actively to install the instrumentation equipment in place. At the same time, Master Zhao Jinlong from the engineering company rushed to the site promptly to provide on-site supervision and technical guidance. Thanks to the hard work of the workers from 11th Chemical Construction Company and the full cooperation of the project department’s equipment room, the calibration of the high-voltage motor in the circulating water pump room was completed on June 22, ensuring the single-unit trial run on the 25th. http://pic.kuaizhan.com/g2/M00/E9/52/wKjmqld5JruAEPXdAAB0MIvxIXQ3275810/imageView/v1/thumbnail/640x0To date, all personnel from the project team as well as those from the construction units have been staying on site in order to ensure the joint commissioning of the utility systems on June 30. Any issues are resolved on the spot, and they are fully prepared to face challenges and difficulties head-on. With full determination, they have set back-to-back target schedules, working together with one common goal to ensure the smooth progress of the utility system commissioning. (Excerpt from China Plastics Business Network)