Is there a high-temperature ultrasonic flow meter for measuring the flow rate of deionized water at 175 degrees Celsius?
Thread Content
For the pipes that have already been manufactured, it’s now clear that operations cannot be halted; flow measurement is still required. The medium in question is desalinated and deoxygenated water, which is non-conductive. The temperature is 175 degrees, and the pressure is 1.5 MPa. Is there any high-temperature ultrasonic flow meter available? ? I need a list of manufacturers; phone numbers would be even better. Thank you
This post was last edited by yuchenchf on 2016-7-27 at 13:28. It’s a German-made product; we have used it, and it’s the best among the domestic products we’ve used, with a temperature capability of 400 degrees. But the price!
High-temperature external clamping ultrasonic flowmeters: the only imported brands available are Flexson and Kolon; domestic options are unknown. Cologne has a lower price, and the Flexson transducer has higher power.
What is the pipe diameter? I have ultrasonic flow meters that can measure up to 200 degrees; they are from German brand E+H. If you need them, feel free to message me privately
The flow meters from British company Connicke can measure temperatures of 230 degrees without any external devices, while with such devices they can measure up to 460 degrees. If needed, you can send a private message.
This post was last edited by Wang Tianze on 2016-8-12 at 20:16. For domestic products, those from Jiangsu Wei Yi Electronics – we use their products very well; many measurements are carried out using their devices, and they are indeed accurate. When measuring 17 tons of ammonia solution, the difference in the readings was only 63 kilograms.
I can meet your requirements without issue, but the price of imported ultrasonic devices is extremely high; it depends on whether you can accept that cost. I recommend Flexon
A rotameter can be used if the diameter is not large.
It is an external clamping type from Zhejiang Diyuan; for specific parameters, please consult the manufacturer