For C2 drawing, are there any relevant learning materials I can refer to?
Thread Content
This post was last edited by xuetong5945 on 2016-9-12 10:32. I have a project that requires stress calculations, along with corresponding diagrams and reports. I’ve never done this before; could anyone who has relevant template files or guidelines share them with me? There are a few more questions: 1. What size frame is generally used for producing the output images? 2. For piping systems determined using the formula method, is there anything that needs to be provided to the owner? 3. Do all pipeline node numbers that need to be calculated have to be set as different values? Are there any tips or rules for this? 4. For the nozzle load, should the manufacturer’s specified value be provided and it be stated that it meets the requirements? Is that sufficient? 5. When trying to convert it to DWG, it says the version is too low; mine is 08. What CAD version do I need to use in order to open the drawings produced by C2? Does anyone know? Newbie seeking advice! ! ! !
Do you need tanker truck drawings? Including calculations; you can add me on QQ: 395483031
2. The formula-based method: can this be used to produce a report stating that the requirements are met based on the calculations using the formula? 4. This should be the result of your calculations, along with the load requirements specified by the manufacturer; the calculation results must meet those requirements, or the manufacturer must confirm that the loads you have considered are sufficient. 5. Install version 16 – it will definitely work with everything