Inverter problems
Thread Content
When the frequency converter is in local mode, can the on-site start button of the pump be used to start it?
The inverter should require setting of the startup method; setting it to terminal-controlled start/stop should work.
This requires clarifying what you mean by \"in place\". If \"in place\" means setting it to panel operation, then the on-site buttons will not function. If by \"on the spot\" you mean remote control, then it can definitely be started.
When the inverter is in local mode, it refers to starting the inverter using its on-site panel
No, as long as the inverter control panel is located locally, all remote start functions cannot be used