Lubricant position
Thread Content
The lubricating oil from the lubrication station is injected into three locations on the non-driving side of the pump. What specific parts of the pump are these three locations?
The image is not clear; only two can be seen. Please send both the top and the side view together
One supporting bearing, with the other two being thrust bearings – one on the main thrust side and one on the auxiliary thrust side
It should be the bearing shells, main thrust bearings, and auxiliary thrust bearings
There is one bearing for each entrance; it seems to be one shaft bearing pad, along with two angular contact ball bearings or deep groove ball bearings. The shaft bearing pad is radial in nature, while the ball bearings are axial
Judging from the situation, the one on the very inside is likely the support tile, while those in the middle and on the outside are the thrust tiles on the two sides. May I ask which brand’s pump this is? Are there any relevant materials available? I’m planning to buy two of these multi-stage pumps soon; for now I’m considering the BB3 model, with the rest of the specifications remaining the same. If you have any materials, please share them for my reference