Solutions to chain skipping and unstable transmission on belt conveyors

Thread Content

When purchasing belt conveyors, it is essential to choose from reputable manufacturers. Do not opt for cheap belts that come at an unusually low price in order to save costs, as this will lead to many problems in actual use. For example, the poor quality of such belts, resulting from their low cost, can cause various issues during production, thereby reducing both the quality and efficiency of production. Today, here we will focus solely on solutions for the problems of chain skipping and unstable transmission: if a belt conveyor experiences chain skipping or unstable transmission during operation, it is necessary to check whether the tooth ends are severely worn, and also to verify that the sprockets at both ends of the drive shaft are within the same tooth groove as the conveyor belt. Generally, there is a gap between the inner hole of such a belt and the main drive shaft; a set screw, an offset sleeve, or a retaining sleeve is used to fix the inner ring of the belt to the main drive shaft, so that it rotates together with the shaft. The conveyor belt of the mesh belt conveyor is made of stainless steel, which gives it high strength, low elasticity, resistance to deformation, ease of maintenance, as well as good cleaning properties, corrosion resistance, and tolerance to harsh environments. It is suitable for use in processing lines for food, snacks, and frozen seafood, as well as in packaging and transportation lines, and for transporting electronic components that require heating or baking. It can also be used in industries such as pharmaceuticals and daily chemical manufacturing.