DRALL zinc-rich coating, quick-drying repair coating at room temperature

Thread Content

『\"Dela Normal Temperature Dry Zinc-Aluminum Coating\": ■ Dela coating refers to a normal temperature dry type film rust-proof coating whose main components are flaky zinc powder/aluminum powder. With a single application layer of only 30um, it offers exceptional rust-proofing capabilities. ■Uses: 1. Repairing coatings on products (screws, bolts, nuts) and enhancing their corrosion resistance. [Repairing damage to surfaces that have been treated with methods such as Disk, Ralfen, Kumite, Dacromet, Delcon, etc.] 2. Painting and refurbishing metal components in vehicle systems, wind power systems, building elements, utility poles, bridges, and highway guardrails; as well as repairing rusted areas. 3. Rust prevention treatment for cut surfaces and welds 4. Repair of the cut surfaces of galvanized steel sheets 5. Repair of hot-dip galvanized surfaces and alternatives to hot-dip galvanizing treatment ■ Treatment methods: Aerosol cans, rollers, or brushes can be used for application; both air-assisted and air-free spraying are feasible. ■ Performance: Salt spray test: 1000 hours without red rust (30 microns). Drying time: Touch-dry in 30–60 minutes. Standard application: Apply in one coat at a rate of 200–250 g/㎡ to reduce coating costs and shorten processing time. Operation efficiency: Single-liquid type, simple to operate, with low control requirements for coating viscosity and good coating properties.