The application of industrial endoscopes in the inspection of pipeline welding quality
Thread Content
After the welding of chemical pipelines, clean pipelines, and pressure-bearing pipelines is completed, it is not possible to visually inspect whether there are defects such as cracks, incomplete welding, or pores inside the welded areas； At present, we can fully take advantage of industrial endoscopes by inserting the probe into the inside of pipes at the locations that need to be inspected, in order to conduct a thorough assessment of the welding quality……
Not bad, colored; we’ve used black and white ones before
Well, it’s a good product, but the cost is a bit high, I guess
Let’s talk about the approximate range that can be inspected, such as pipe diameter and length.
Industrial endoscopes perform well in practical applications and are widely used
Detection diameter range: 3mm to 1000mm are all applicable, but this can only be achieved with lenses having more than two parameters； The length is within 10 meters; this depends on the diameter of the insertion tube, as different diameters allow for different lengths
It should be longer; a length of up to 10 meters still has certain limitations