Seeking help with the issue of repairing high-pressure flange surfaces
Thread Content
This post was last edited by Heiming on 2017-10-20 at 11:38. There are wear marks in the high-pressure flange seal groove of DN150; how to repair it? The operating temperature is 400 degrees, and the pressure tolerance is 5 MPa. How to repair online? 2500BL
Some companies can bring tools to carry out on-site repairs
Find a number: Manager Wang, 13503222803
Material 347 DN150 2500BL
Flanges with particularly high weights are not easy to repair on-site, right? The air cooler manufacturers require that if the flange surface is damaged, the flange must be cut off and sent back to the factory for processing
The sealing surface cannot be repaired on-site; it needs to be machined using a lathe, and an angle grinder cannot be used. It weighs 171.6 kg, so a lathe can be found locally.
The RJ side is hard to repair....
Companies that need to be restructured must be repaired. Manufacturing companies should know how to repair
Professional on-site repair, CNC equipment imported from Germany. Liu: 15753181280. Leave your phone number if you’re interested in learning more
It is necessary to find a professional manufacturer of high-pressure flanges; safety under high temperature and pressure is of top priority.