Regarding the cutting of insulation material for pipelines, as shown in the diagram, the total volume will be calculated. I would like to ask everyone: how is the volume of the insulation casing and the insulation material calculated...
Thread Content
Regarding the cutting of insulation material for pipelines, as shown in the diagram, the total volume will be calculated. I would like to ask everyone: how is the volume of insulation enclosures and insulation materials calculated?
For reference, the outer diameter of the pipeline is 108, its length is 100 m, and the insulation thickness is 50.
Thank you, I figured it out before. These two: one is for the equipment, and the other is for the pipes.
Generally, the design specifies an open clearance; when purchasing, engineering tolerances are taken into account. Even in the case of tolerances, the volume changes resulting from length tolerances must also be considered. It should be noted that the insulated inner diameter of a heat-tracing pipe must be at least one size larger than the outer diameter of the pipe wall. For pipes with smaller diameters, the insulated material required needs to be at least two sizes larger. The specific parameters need to be determined based on the diameter of the heat-tracing pipe and the temperature of the main pipe