Thread Content
This post was last edited by 955559 on 2018-10-14 at 21:01. Ordinary gas regulators are divided into two main types: imported gas regulators and domestically produced gas regulators. Imported pressure regulator, to Fisher in the United States. The United States beats Seth. Echuang of the United States. These voltage regulators that entered the Chinese market first were relatively expensive. Relatively speaking. Of course, it also depends on the flow rate and pressure of the gas regulator. For example, voltage regulators in the range of about 50 units, covering five directions, ten directions, and so on. For the most part, it can be done for 500 yuan or less. These all belong to the low-voltage category. Also, if it is used for compressed natural gas. The pressure regulating valve. Because the pressure levels are high, the requirements for the material of the pressure regulating valve are also high. So the price is higher. In short, the prices for flirting vary widely. It mainly depends on the material, pressure, and flow rate. Consider the requirements for accuracy of use. There are also natural gas gate stations, urban pipeline networks, and distribution stations. In these areas, the flow rate of the voltage regulators is relatively high. From DN50, DNn200. Even higher. The price can range from tens of thousands to over a hundred thousand.
The price varies greatly depending on the brand chosen
Yes, there are too many factors that affect prices; Don’t discuss prices impulsively or angrily: victory:
I manufacture AMCO-ELSTER gas pressure regulators; feel free to leave a message if you need any information.