The process design requires pipes with a diameter of 400 mm, but they are not available on the market. What should be done?
Thread Content
The process design requires pipes with a diameter of 400 mm, but they are not available on the market. What should be done?
The diameter of the 16\" pipe is 406.4 mm – will that work?
Haha, it’s an approximate size. According to GB/T21835, the diameter is 406; if you need a large quantity, you can order directly from the supplier
Tubes with an outer diameter of 426 are available on the market
Tubes with a diameter larger than 400 do exist; spiral welded pipes and straight-seam pipes are quite common. Generally, the operating pressure of large-diameter pipes is not very high, nor is the hazard level of the fluid involved very high; for example, circulating water and air release systems can both make use of such grooved pipes
Hello, if you need one with a diameter of 400, I can manufacture it for you. My contact number is 18833768768, Liu
According to standard GB/T21835, select the one with the diameter that is closest; this should allow for communication with the process design team