I seek guidance from experts regarding the description and representation methods of pipe fittings
Thread Content
6\" CAP SMLS BW S-40 CS ASTM A234 GR.WPB ASME-B16.9 – There are two material descriptions for this pipe cap; is the first one, SMLS BW S-40 CS, a description of the pipe itself, while the second one, ASTM A234 GR.WPB, is the material of the pipe cap? If I need to purchase a pipe cap for a DN150 A106 GR.b SCH40 pipe, would it be acceptable to specify it as DN150 CAP SCH40 ASTM A106 GR.B BW SMLS SH/T3408? I’m just starting to work with this, so I’d appreciate some guidance from those who are more experienced
Sure. The front part is the description, and the back part is the standard.
6-inch pipe cap, seamless, butt-welded, wall thickness SCH40, carbon steel material
It is not recommended to write it in this way. A106 refers to materials based on American standards, while SH3408 is a standard used in China. Here is a reference description for a pipe cap based on American standards: CAP; ASME B16.9; ASTM A234GR.WPB; SMLS; BW; STD
It is best to separate the material standards for different systems. . There are corresponding standards for how to describe it. A principle that tells purchasers what to buy and manufacturers what to produce. . Information such as standards, specification names, size types, materials, and interface dimensions must all be included