I hope experts can identify the brand of this ball valve, as shown in the picture! ! !
Thread Content
This post was last edited by sdwfsgyykai on 2019-6-11 at 16:41. There is no valve stem, so the brand cannot be seen. It is a three-way ball valve. It was bought by someone else; I now want to buy the same one, but I can’t find the brand. Please help me out
Uh. I only saw “made in Italy”… It’s imported, from Italy:P:)
I really want to switch to a domestic brand, but I can’t find one that suits me. It is required to withstand low temperatures of below -35°C and high temperatures of above 200°C. Threaded port; the volume cannot be too large. Could you recommend one?
Ask about Yiboruo and Zhongshan Tiewang – check with both of them
This situation is quite common here as well; during the later production stages, many original manufacturers replace components due to various reasons. Here, we generally submit information based on the approximate parameters of the valves, and when making purchases, it is necessary to consult with the suppliers to finalize the details, as different manufacturers require different data and follow different standards! It would be best to provide detailed process parameters!
Such ball valves are now widely available domestically, with many manufacturers producing them
Indeed, many manufacturers produce them, but if you want reliable quality, they should be PN40 grade, capable of withstanding temperatures as low as -35°C and as high as over 200°C. Threaded port. Are there any suitable manufacturers? Could you recommend some? Thank you
PN40: resistant to low temperatures below -35°C and high temperatures above 200°C. Threaded connection, G 1.25 inch. Are there any suitable manufacturers? Could you recommend some? Thank you