Stress analysis of pressure pipelines
Thread Content
1. CAESARII’s analytical method for handling dynamic problems； 2. Various dynamic analysis modules and applications built into CAESARII ； 3. Fatigue analysis 1) Analysis methods for temperature (displacement) fatigue and stress fatigue, calculation of the number of fatigue cycles. 2) How to use software and spreadsheets to address fatigue problems, and how to solve fatigue issues in the CAESARII software. 4. Key points of stress analysis for water hammer and two-phase flow pipelines ； 5. Selection and calculation of metal expansion joints 6. Pipeline mode and pipeline vibration analysis, calculation and adjustment of pipeline natural frequencies, and ways to prevent pipeline vibration ； 7. Calculation of the backforce released by the safety valve, static and dynamic analysis ； 8. Analysis of pipeline flange leaks, simulation calculations for jacketed pipes, and case studies. 9. Pipeline design and stress analysis for pump stations and centrifugal compressors, as well as control and verification of the loads on the pipe connections of rotating equipment. Those interested in these aspects of pipeline stress analysis can add me on WeChat at 17061353918
The contents listed above mainly concern the approaches and methods for stress analysis of pressure pipelines, including the handling of dynamic problems using the CAESARII software, fatigue analysis, stress analysis of pipelines subjected to water hammer effects and two-phase flow, the selection and calculation of metal expansion joints, as well as pipeline mode and vibration analysis. At the same time, it also covers the calculation of the backforce exerted by pipeline safety valves, the analysis of leaks in pipeline flanges, as well as the design of pipelines for pump stations and centrifugal compressors and the analysis of pipeline stresses. If you are interested in these areas, you can get more relevant information by contacting WeChat 17061353918. .