Standards and solutions related to non-metallic conductivity

Non-metallic equipment or pipes are not conductive by themselves, but when they contain flammable materials, the following methods can be used for static grounding: 1. Use metal grounding wires: Burial metal grounding wires near the non-metallic equipment or pipes, and connect them to the metal grounding system in the ground. In this way, static electricity can be guided to the ground through a metal grounding wire, thereby achieving static grounding. 2. Install static conductive strips: Attach or fix static conductive strips to the surface of non-metallic equipment or pipes. Electrostatic conductive strips are usually made of metal or conductive materials, and can direct electrostatic charges to the ground. 3. Use static grounding devices: Install specialized static grounding devices, such as static grounding plates and static grounding networks. These devices are typically made of conductive materials, allowing them to effectively guide static electricity to the ground. 4. Grounding and discharge systems: In addition to static grounding, grounding and discharge systems can also be used to manage static charges on non-metallic equipment or pipes. This system typically includes electrostatic monitoring equipment and electrostatic discharge devices, which can monitor and discharge static electricity to ensure the electrostatic safety of equipment or pipelines. It should be noted that when performing static grounding, relevant safety standards and regulations must be followed to ensure the reliability and safety of the grounding system. .