The on-site safety inspection revealed that the installation of combustible gases was not in compliance with standards
Thread Content
On-site inspection revealed that the distance between some gas detectors and the surrounding equipment and pipelines was less than 0.5 m. In accordance with Article 6.1.3 of the standard GB50493-2009 \"Code for Design of Detection and Alarm Systems for Flammable and Toxic Gases in Petrochemical Industries\", there should be a clear distance of not less than 0.5 meters between the probe and the equipment or pipelines, as well as access passages ； If rectified in accordance with the specifications, the probe shall be installed on the fire escape ； I would like to ask the experts here ； How to explain it to the evaluation agency. Thank you
Then proceed with the settings according to 4.2.1 and 4.2.2.
smlx1978 Silly fool 〃 beach