Alternative use of lubricating oil
Thread Content
This post was last edited by jimjcz on 2014-12-31 at 15:47. I would like to ask: since we have run out of 100# machine oil, can 150# air compressor oil be used as a substitute for use in reciprocating compressors? I currently only have 46# lubricant, 150# air compressor oil, and 150# industrial gear oil here. . . The substitution period is not long, about a month. Is it feasible?
This post was last edited by yangyong1980 on 2014-12-31 at 15:42. Using 50# and 150# in combination, a 1:1 ratio should work, right?:lol, provided they are from the same brand; mineral oil and synthetic oil cannot be mixed together
Could we consider using N100 rust-resistant turbine oil as a substitute?
I currently only have 46# lubricant, 150# air compressor oil, and 150# industrial gear oil here. . .
From a lubrication perspective, it is not possible to replace oils of different specifications.
I wonder what type of machine the original poster has, and what are its power and speed specifications?
Our unit has always used oil for air compressors, but we compress natural gas
No, different labels and formulations may react with each other, leading to undesirable consequences such as a decrease in viscosity; be extremely careful
No. . Viscosity: the values for various parameters vary
Mixing is not recommended. The labels are different; unless everything is polished, use 150-grade air compressor oil. It’s best for you to check the manual yourself, or you can also consult the manufacturer. But why use machine oil instead of compressor oil for your compressor? 100# fully synthetic mechanical oil?