The filter at the inlet of the gas compressor is clogged
Thread Content
The filter at the inlet of the gas compressor is clogged, which results in a low inlet flow rate. What should be done? I don’t want to stop the machine to carry out repairs
If it’s on the main pipeline, there’s a chance to stop operations for modifications; add another set of filters to enable online switching. There won’t be scaling, right? Is it caused by tar or naphthalene?
Use a filter with one active and one standby unit for online switching.
Centrifuges can be equipped with backwashing, while reciprocating machines do not need it.
It’s probably caused by tar or naphthalene; it’s not easy to deal with this without stopping the vehicle
It’s tar, I’d better shut down the machine