The oil scrapper gland of a reciprocating compressor presses down on two oil scrapper rings at the same time
Thread Content
Does the oil-scraping gland press down on both oil-scraping rings at the same time?
Both oil-scraping rings should be pressed at the same time, but after the cover is installed, the two oil-scraping rings should be able to move up, down, left, and right; otherwise, they will lose their function of scraping oil. Of course, the axial gap between the two oil-scraping rings should be very small.
During installation, it is important to note that the oil-scraping ring should have oil return holes, or that the side with the cutting edge should face the compressor crankcase
But there must be a gap to ensure that the oil scrapper ring can move inside
The poster has done a great job with this photo; please share more photos like this with labels in the future. Everyone should learn more!
Thank you for the explanations on floors 2-3. I’ve learned it.*
Thank you for the explanations on floors 2-3. I’ve learned it.*
Thank you for the explanations on floors 2-3. I’ve learned it.*
Thank you for the explanations on floors 2-3. I’ve learned it.*
Thank you for the explanations on floors 2-3. I’ve learned it.*