Translate
Thread Content
For all machinery train items, 2 Simplex RTDs per loaded pad shall be installed in each radial bearing.
Each radial bearing should be equipped with a single RTD gasket.
The gasket isn’t very accurate; it’s just a matter of embedding the temperature probe in the bearing shell, but describing it is quite complicated.
:Lol, I used Baidu to help with the translation. Haha
Should shims be installed on all the temperature probes on radial bearings? ?
I’ll translate it myself for the benefit of those who come after. In each radial bearing shell of the assembly, there should be 2 load-bearing segments with temperature sensors installed separately in them.
I’ll translate it myself for the benefit of those who come after. In each radial bearing of the engine unit, there should be 2 load-bearing pads with individually installed temperature sensors.