Sludge sealing equipment
Thread Content
After D1001 is dried, it enters D1002 for pyrolysis reaction. The pyrolysis process will produce hydrogen, methane, carbon monoxide and other gases, so D1002 requires the feed end to be sealed. It originally used a hydraulic pushing structure, relying on a piston to push the material back and forth. If the material cannot be sealed, gas leakage will easily occur. Now I want to use a star discharge valve or other equipment. Do you have any good ideas? materials: The moisture content of municipal sludge after drying is about 20%.
What is the material properties after D1001 drying?
When it is very dry and compacted, it will have a certain viscosity. Normally, there will be no viscosity.
Specific and detailed properties, such as whether it is lumpy, bulk density and flow rate, etc.
My dear, which company does pyrolysis come from?