Low-temperature shaft material for mixing tanks
Thread Content
I would like to ask: when designing the drive shaft for a mixing tank, with temperatures as low as -50 degrees, are there any suitable materials for the shaft that can be used?
The temperature isn’t high either. What medium?
Specific media and operating condition parameters are required
I’m sorry; I haven’t been on the forum these past two days, which is why the reply is delayed. The mixing tank is used for the cationic polymerization of styrene to produce polystyrene. No information regarding the steel used for pressure vessels could be found in the reference materials either.
The stirrer tank is used for the cationic polymerization of styrene to produce polystyrene. Its operating temperature is -40 degrees Celsius, while the design temperature is -50 degrees Celsius. The calculated pressure inside the tank is 0.4 MPa, and the calculated pressure in the jacket is 0.5 MPa
Seeking advice: Which brand is used for mechanical seals in low-temperature mixing applications?