Issues regarding the measurement of cylinder levelness in reciprocating compressors.
Thread Content
During maintenance, there is a discrepancy regarding the measurement position for cylinder level in reciprocating compressors. 1. The manufacturer’s staff require that, when measuring the levelness of the cylinder, a level should be placed on the machined surface of the cylinder. 2. We believe that the level should be placed on the mirror surface of the cylinder liner for measurement.
You might want to check out the SHT3544; it might have what you’re looking for.
Actually, neither is wrong; the decision should be based on the actual operating conditions of the equipment on site. First, it is necessary to determine the degree of wear on the cylinder rings and the inner diameter of the cylinders, to check for any signs of wear or thinning. Next, it is important to verify whether the volume of air and the pressure are within normal ranges, as these factors serve as a basis for determining whether the effective compression volume meets the required standards. Finally, it is essential to check whether there are any abnormal vibrations or noises during the actual operation of the machine, as well as whether the pressure and temperature are within normal limits; these aspects serve as references for selecting appropriate points for performance evaluation