Equipment fire protection layer
Thread Content
consult: Does the equipment skirt or support need to be equipped with a fireproof layer? Where are the regulations? Does it look at the media inside the device or the location of the device?
The fireproof layer of the equipment skirt or support needs to be determined based on the location of the equipment and the medium inside the equipment. In China, regulations on equipment fire protection layers mainly refer to relevant regulations and standards such as the "Building Fire Protection Design Code" (GB 50016-2014) and "Technical Regulations on Fire Protection for Electrical Equipment" (GB/T 22274-2008), which stipulate the requirements for fire protection layers and their thickness that need to be installed at different locations for different types of equipment. Generally speaking, the location of the equipment skirt or support is one of the key factors to consider. If the equipment is located near flammable and explosive materials or in a high-temperature area, a fireproof layer must be installed to prevent the equipment from catching fire and causing serious consequences. In addition, the physical properties of the medium in the equipment are also factors that need to be considered. For example, certain chemical reactions can produce dangerous situations such as high temperature and high pressure. In this case, it is necessary to determine whether a fireproof layer needs to be installed based on the characteristics of the medium. In short, whether the equipment skirt or support needs to be equipped with a fireproof layer needs to comprehensively consider the above factors and make a decision based on compliance with relevant regulations and standards. .
When to set it up, see GB 50160-2008 (2018 edition) Petrochemical Enterprise Design Fire Protection Code. How to set it up, see SH-T 3098-2011 Petrochemical Tower Design Code.
You're welcome, you can ask me any questions at any time. .