How to choose 30% KOH for the material property parameters in HTRi?
Thread Content
How to choose the material property parameters in HTRi for 30% KOH? Please explain, experts
Customize properties using HTRI: Enter specific heat, viscosity, thermal conductivity, density, etc. Check the data in manuals: the inorganic materials section, or you can also search online.
This post was last edited by Ba Jinjin on 2022-6-23 at 16:13. Is this configuration in the VMG property database correct?
Is it correct to choose 0.7 and 0.3 in the VMG property database?
The calculations done by software are often not very accurate; it’s still better to consult property tables. Or provided by the user.
I found it in the material properties manual. As for the software, do you think there’s any problem with this approach?
If it’s a 30% mass ratio, I think writing it that way is fine; that’s how I calculate it anyway
Okay, if I want to find out the properties of H2 at 1.7 Mpa, how should I do that? Expert
Water and potassium hydroxide can be used at the specified ratio
The condition is: what is a 30% KOH solution? For example, a 30% KOH aqueous solution, with the unit of composition being mass. For example, for a mixture of 30% KOH and 70% water by mass, with a total mass of 1000 kg/h, the distribution is based on the total mass.
The properties of sodium hydroxide are always incorrect. How can I view its properties in the software?