I want to design a wastewater treatment plant and would appreciate some suggestions regarding the processes involved. Thank you!
Thread Content
1. Sewage flow rate: The average daily flow is 32,000 m3/d； Wastewater quality: CODCr=320 mg/L, BOD5=140 mg/L, SS=210 mg/L, NH4+-N=24 mg/L. The average pollution level temperature is 15°C. 2. Effluent quality: CODCr ≤ 60 mg/L, BOD5 ≤ 20 mg/L, SS ≤ 20 mg/L, NH4+-N ≤ 5 mg/L. 3. Meteorological data: The average annual temperature is 16.5°C, with the lowest average monthly temperature in winter being 2°C.
Our chemical industrial park is also building a new wastewater treatment plant. It is an industrial wastewater treatment plant that uses a combined process of physical-chemical treatment, homogeneous hydrolysis, A/O biological treatment, high-density sedimentation tanks, activated carbon filters, and chlorine dioxide disinfection. The designed capacity for treating wastewater is 25,000 m3 per day. II. Install sewage pipelines in the new factory area. You can look up information about the “Phase I Project of the Sewage Treatment Plant in Gaolan Port Petrochemical Park” online.
Learning*, plus instrument support provided: lol:lol:lol
Dear, what kind of support are you looking for?
Hey, do you need support regarding valves? P
Installing DTRO will solve it!