Thread Content
Are there any valves that can separate gas from liquid, allowing only gas to pass through? Such valves that, after the gas has been released, prevent water from flowing out when it comes into contact with water
A gas-liquid separator is a device used to separate gases from liquids. The following is an introduction to it: Working principle – Gravity sedimentation: Taking advantage of the difference in weight between liquids and gases, when a gas-liquid mixture enters the separator, the liquid settles at the bottom due to gravity, while the gas continues to flow upward, thereby achieving separation. - Baffle separation: Since the density of gas and liquid is different, and the liquid has greater inertia, it collides with the baffle plates; after adhering to the wall surface, it flows downward due to gravity, thereby achieving separation. - Centrifugal separation: The gas-liquid mixture rotates inside the separator; the liquid experiences a greater centrifugal force than the gas, causing it to collide with the wall of the cylinder and adhere to it, after which it falls due to gravity and is thus separated. Structural features: It generally consists of a housing, an air inlet, an air outlet, a waste discharge port, etc. Some also have internal structures such as baffle plates, cyclones, and filters to enhance the separation effect. Classification – Gravity type: Simple structure, suitable for situations with low liquid content. - Cyclone type: Uses cyclonic centrifugal force for separation, suitable for gas-liquid mixtures free of impurities. - Filter type: Removes solid particles and impurities from liquids through filtration, and is used in applications where high liquid purity is required. - Floating type: Utilizes the principle of buoyancy to handle mixtures with a high liquid content and solid particles. Application areas – Refrigeration systems: Installed between the evaporator outlet and the compressor inlet to protect the compressor and improve refrigeration efficiency. - Compressed air system: Removes moisture and oil from compressed air, thereby providing preliminary purification of the compressed air. - Petrochemical industry: Separation of oil-gas mixtures, gas-liquid two-phase flows, etc.; for example, liquid-gas separators are used for the initial degassing of gas-entrained drilling fluids. - Other fields: such as geothermal steam separation, condensate water separation in vacuum systems, etc.
Are you referring to this kind of JBT 12386-2015 water supply pipeline inlet and exhaust valve?
He didn’t explain clearly; he didn’t mention the specific usage environment