Seek help for highest permissions 1131
Thread Content
This post was last edited by MAO Xiaoqiang on 2017-5-10 10:09 to modify the hardware
Theoretically, with proper operation, the local lower component can be used \"innumerable times\" – in any case, it will definitely meet your requirements! Your processor is broken in two places and you’re still going on? ! It’s also a god~~~
It’s fine to have two faulty ones; we tried this during the FTA testing at Shenmu Steam Turbine. By removing those two processor cards, the system continued to work normally. Additionally, it was installed locally dozens of times – I can’t remember the exact number – and after that many installations, it was necessary to shut down the power and restart the system
What do you mean by power outage and restart?
1131 is a 3-2-1-0 configuration; two processors have failed, but the remaining one continues to operate. The exact number of times local downsizing has been applied is unclear, but over these many years we have made numerous modifications without ever reaching the upper limit for local downsizing; you can consult their technical support staff.
Why is the hardware modification button gray? Final permission granted
If the PLC loses power, simply restart it and reconnect it – this is what we do when there is a limit on the number of times it can be restarted
Local loading refers to the loading of programs within software, and it has nothing to do with hardware. Are you going to change the hardware? When the hardware button is gray, it generally indicates that it cannot be modified in the current state, and this has nothing to do with the maximum number of times it can be used locally. We do not allow hardware modifications online, so we have not encountered the issue you faced.