Looking for recommendations on level gauges
Thread Content
The device is used for producing polyester, and currently the level gauge on one of the reaction vessels is malfunctioning. It cannot be replaced online. So I want to use an external-mounted level gauge or some other type of level gauge. The installation must not disrupt production. First, thanks to my colleagues????
A radioactive level gauge can be used, but the problem is that it’s very troublesome and dangerous.
The procedures are too complicated. External light source – feels unsafe
This cannot be achieved if there are no pressure tapping ports
There are now external ultrasonic level gauges. Non-nuclear radiation. I haven’t used it, but I’ve also heard it recommended by the manufacturer.
External-mounted level gauges – made by a company in Xi’an that is quite well-known; they are widely used in tank trucks
http://bbs.hcbbs.com/forum.php?mod=viewthread&tid=1382362
This post was last edited by budaoweng123 on 2017-11-10 at 10:07. For external installation, many tank areas are required by safety regulations to be modified, which necessitates the addition of level gauges; almost the only option available is external installation. However, there are various claims regarding this device; in some cases, the liquid level fluctuates violently whenever thunder occurs
Radar, ultrasonic, and infrared level gauges can all be used; they are installed at the pipe opening at the top of the reactor, and these level gauges are resistant to acids and explosion-proof……
This post was last edited by 1111111 on 2017-11-14 at 19:11 :P 1. The stupid mastiffs are falling out of favor; go buy some instead. If you don’t mind wild dogs, there are plenty of them in Yushu – you can adopt a few as well~～～～～ 2. You can train these dogs to act as external level sensors. 3. The dogs will listen to the sound coming from the containers; they’ll bark a certain number of times corresponding to the depth in meters. For example, if the depth is 1.3 meters, they’ll bark once long and three times short; for 2.3 meters, it will be two long barks followed by three short ones; and for 12.3 meters, it will be one long bark followed by two long and three short barks. 4. I guarantee accurate readings without any errors :lol 5. The most important thing is to train the dogs properly. If you want to convert their barks into 4–20mA signals to send to a DCS system, then come to me! Bro, I won’t charge you any development fees; I’ll work with you to promote the Zang Ao external level gauge – how about that?